Roku com linkRoku SupportSupport roku com

Fixing The Video Problem In Roku Using Tried And Tested Procedure

roku com

Roku is one of the topmost choices when it comes to world-class entertainment. But, Roku is an electronic device, which can succumb to hardware and software issues. Today, we are going to discuss the problem of ‘no video from Roku player on your TV’. This is a very common problem that people are facing in this device. Why this problem occurs and how it can be resolved will be discussed in this blog post.

What should be your first actions when you see ‘no video from Roku on your Television screen’?

Roku com link

Start off with checking the connection between your TV and Roku. In case, you have connected a soundbar or an AVR, then you will have to disconnect it and connect it directly to the TV. Doing this will make it easier for you to resolve the issue with the sound bar or AVR, plus you will be able to resolve the video problem with Roku in a much easier way.

Turn on your TV and then, press any button on the Roku’s remote control. Doing this will let you know whether your Roku device is in standby mode or active.

Turn on your TV followed by pressing any button on the Roku remote control. This will confirm whether or not the Roku device is on a standby or screensaver mode.

Reasons Why This Video Issue May Arise In Roku :

Selection of wrong input on the TV

  1. Selecting a wrong input may cause video issues, and the majority of people choose a wrong input most of the time. There are multiple inputs at the back or side of the TV to which a device can be connected. But, it is important to choose the right input on the TV that corresponds to the port to which the device has been connected.
  2. Every TV brand has its own specific features, which may or may not resemble with other brands. So, you need to find out the right button on your TV’s remote to change the inputs. An instruction manual is always given with the TV, so you can follow that. If you are not able to follow the manual, then kindly go through below-mentioned tips:
  1. There will be a button on your TV’s remote control, most probably at the top that says ‘source’, ‘video’, ‘input’, ‘AUX’, ‘TV/Video’ or something else related to these words. You need to press that button and then, you will see multiple options. Select the right input from those options.
  2. If your TV cycles through the inputs, then wait 10 seconds between each input presses because your TV is taking time to detect the video.
  3. In case, you see a menu, then use arrow buttons on the TV remote to choose the right input. Then, press ‘enter’ or ‘select’ to select each input. As your TV cycles through inputs, so wait for 10 seconds between each input presses.
  4. If the issue still persists after following above-mentioned steps, then you will see either of these messages, ‘no video’ or ‘no signal detected’.

Video Cable Not Properly Connected Or The Cable May Have Gone Faulty

  1. Take a look whether all the cables that connect your TV with Roku are connected properly. If you are using Roku streaming stick, then check whether it is properly connected to the HDMI port of the TV.
  2. If any cable is faulty, then get it replaced with a new one.

Something is not right with the TV

  1. Connect your Roku device to a new input on the TV so as to confirm if the problem is in the television connector.
  2. If the problem is in the Roku device, then you should try connecting the same to a different TV. With this, you will get a better idea regarding the source of the problem, whether it is Roku or TV.

www roku com support | www roku com link 

Leave a Reply

Your email address will not be published. Required fields are marked *